Leica-geosystems TPS800 DXF Export Bedienungsanleitung PDF herunterladen

TPS400 and TPS800 DXF Data Output Page

TPS400 and TPS800

DXF Data Output

A number of DXF output options are supplied to give different solutions.

Both 2D and 3D output formats are included.

The Format Manager used to create these DXF Data Outputs does not have any

arithmetic or branching functionality so that text information is always written to the

right of the point with the text ‘hot spot’ at the same location as the point. In some of

the outputs, text is written to a single Layer with the text in a single line. In others, the

text is on different Layers, but written as described above, so that if all the Layers are

switched on together, the text appears to overwrite.

The TPS400 and TPS800 Data Output option does not have the capacity to hold the

large amount of records to be found in a DXF file Header. The Header portion of a

DXF file usually contains information relating to the limits of the data calculated from

the co-ordinates contained in the data set. As this is not possible with the TPS400 and

TPS800 Data Output it is likely that you will not immediately see your data when it is

imported into AutoCAD®, or your CAD package. Use View, Zoom, Extents, or the

equivalent in your CAD package, to see the data. If the data appears very small, or

against the edge of your screen, you may also need to use the Pan and Window

options to obtain the optimum view of your data.

dxf3DP

This option creates a 3D DXF file of the measured points, which are placed in a layer

called Point, using a cross symbol named CROSS.

dxf3DPC

This option creates a 3D DXF file of the measured points, which are placed in a layer

called Point, using a cross symbol. The Point Numbers are placed in the layer Pt_no

and the Codes, recorded in Code field in the Codelist, are placed in the layer Code.

There is not sufficient scope to move the text fields so both the Point Number and

Code are placed adjacent to the cross but on different layers.

PointId

Code

1 2 3 4 5

Inhaltsverzeichnis

Seite 1 - TPS400 and TPS800

TPS400 and TPS800 DXF Data Output Page 1 TPS400 and TPS800 DXF Data Output A number of DXF output options are supplied to give differen

Seite 2

TPS400 and TPS800 DXF Data Output Page 2 dxf3DP+C This option creates a 3D DXF file of the measured points, which are placed in a layer

Seite 3 - . PointId Height

TPS400 and TPS800 DXF Data Output Page 3 dxf3DH This option creates a 3D DXF file of the measured points, which are placed in a layer l

Seite 4

TPS400 and TPS800 DXF Data Output Page 4 e.g. + 27,PLP,1106.525,1098.584,102.885 is the text written against a point with: Point Number

Seite 5 - Surveying

TPS400 and TPS800 DXF Data Output Page 5 Surveying Use the Surveying Programme the TPS400 or TPS800 to record the data so that it can be

Verwandte Modelle: TPS400 DXF Export

Kommentare zu diesen Handbüchern

Keine Kommentare

Leica-geosystems TPS800 DXF Export Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Leica-geosystems TPS800 DXF Export herunter. Leica Geosystems TPS800 DXF Export User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: TPS400 DXF Export

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Leica-geosystems TPS800 DXF Export